Analisis Tingkat Risiko Bahaya Kerja Menggunakan Meode Hazop (Hazard and Operability) pada PT. Madubaru PG/PS Madukismo
DOI:
https://doi.org/10.56799/jim.v2i2.1336Keywords:
Accident, Risk, Hazard, Hazard and OperabilityAbstract
PT. Madubaru in every production process has hazard factors in the workplace in the form of physical properties, ergonomics, and work potential such as noise, fire, and explosions that may occur and can endanger the safety of workers. The purpose of this study is to determine the possibility of an event or impact from work accident hazards and to find out efforts to control or improve potential work accidents so that risk handling can be carried out quickly and accurately using the HAZOP (Hazard and Operability) method. Based on work accident data that occurred in the 2021 milling season, there were 18 work accidents. Through data processing using a risk assessment obtained from the likelyhood level analysis and the Severity level assessment, 7 values of T risk (High) are obtained, namely at the floor study point with 4 of them occurring at the mill station, 7 S (medium) risk values at the mill study point; sugarcane; gearbox; warehouse cranes; and grinding; 4 risk values R (low) at the point of the jack review; hot water; mill 3; rotary handlebar. Improvements or control efforts that can be carried out on PG Madukismo are using PPE such as helmets, glasses, gloves, shoes to avoid or minimize work accidents, namely getting angry splashes, falling sugarcane, slipping, and being stung by animals such as centipedes. Then the addition of a warning system such as a label as a marker of danger in certain production areas. The warning system can help workers to always be careful in areas that cause work accidents.
Downloads
References
Agus, W. (2017). Analisis Kesehatan dan Keselamatan Kerja Dengan Metode Hazard and Operability (Hazop) Di Bengkel Dan Laboratorium Teknik Instalasi Tenaga Listrik SMK N 2 Wonosari 2017. Pendidikan Teknik Elektro Fakultas Teknik Universitas Negeri Yogyakarta 2017, 1, 143.
Astuti, S. I., Arso, S. P., & Wigati, P. A. (2017). Analisis Standar Pelayanan Minimal Pada PT. MadubaruPT. Madubaru. Analisis Standar Pelayanan Minimal Pada PT. MadubaruPT. Madubaru, 3, 103–111.
Auliya, A., & Handoko, F. N. (2020). The Application of HACCP ( Hazard Analysis Critical Control Point ) In Food Production Department. KnE Life Sciences, 2(2). 1-12.
Bastuti, S. (2021). Identification of Potential Hazards on Production Machines With Hazops and Fishbone Diagram. Jurnal Teknik Industri, 1 (Januari) 17–25. https://doi.org/10.24853/sintek.15.1.17-25
Basuki, B. S. P. M. (2022). JSA and HAZOPS Methods for Risk Assement On OHS. Journal of Applied Business Administration, 1, 136–144.
Fatmawati, S. (2018). Analisis Risiko Keselaamatan dan Kesehatan Kerja Dengan Menggunakan Pendekatan HAZOPS (Hazard and Operability Study) pada Pekerja PT. KURNIA MITRA SAWIT Kecamatan Aek Natas Kabupaten Labuhanbatu Utara. Jurnal Pembangunan Wilayah & Kota, 1(3), 82–91.
Hamzah, A. (2020). Metode Hazard And Operability Analysis Of The Causes Of Work Accidents Using The Hazard And Operability Method At Pt . Perkebunan Nusantara Xi. Jurnal Keselamatan, Kesehatan Kerja Dan Lindungan Lingkungan, 2, 2–4.
Handoko, T. H. (2012). Pengantar Manajeman Karangan T . Hani Handoko Bab 2. Faizal Nuzul Razak Hamid, S.E, 1(1), 30.
Kuswanda, A., . S., & Novita Deniati, E. (2021). Occupational Accident Analysis in CV. Purnama Workshop Using HAZOP (Hazard and Operability) Method. KnE Life Sciences, 2021(ISMoPHS 2020), 289–298. https://doi.org/10.18502/kls.v0i0.8888
Malinda, A., & Soediantono, D. (2022). Benefits of Implementing ISO 45001 Occupational Health and Safety Management Systems and Implementation Suggestion in the Defense Industry : A Literature Review Manfaat Penerapan ISO 45001. Sistem Manajemen Kesehatan dan Keselamatan Kerja. 3(2), 35–47.
Ningsih, S. O. D., & Hati, S. W. (2019). Analisis Resiko Keselamatan Dan Kesehatan Kerja (K3) Dengan Menggunakan Metode Hazard and Operability Study (Hazop) Pada Bagian Hydrotest Manual Di Pt. Cladtek Bi Metal Manufacturing. Journal of Applied Business Administration, 3(1), 29–39. https://doi.org/10.30871/jaba.v3i1.1288
Nur, M. (2020). Analisis Keselamatan dan Kesehatan Kerja Menggunakan Metode Hazard And Operability Study (HAZOP) Di PT. XYZ. Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 4(2), 133. https://doi.org/10.24014/jti.v4i2.6627
R R Andhika, A., & Hassanudin, A. (2019). Penilaian Penerapan Keselamatan Dan Kesehatan Kerja Di Sentra Industri Gamelan Menggunakan Metode Hazopdan Wise. Jurnal Keselamatan, Kesehatan Kerja Dan Lindungan Lingkungan, 5(2), 152–167.
Rahmadini, A. F., Andarini, D., Camelia, A., & Ermi, N. (2021). Occupational Health and Safety Risk Assessment on Informal Workers in Ogan Ilir , South Sumatra. Penilaian Risiko Keselamatan dan Kesehatan Kerja , 1, 412–419. https://doi.org/10.20473/ijosh.v10i3.2021.412-419
Ramadhania, M., Saputra, N., & Herdiansyah, D. (2021). Analisis Hazard Identification , Risk Assesment , Determining Control ( Hiradc ) Pada Aktivitas Kerja Di Ud Ridho Abadi Tangerang Selatan Tahun 2020. Kesehatan dan Keselamatan Kerja, 2(1), 59–68.
Setiawan, E., Tambunan, W., & Kuncoro, D. K. R. (2019). Analisis Risiko Keselamatan dan Kesehatan Kerja Menggunakan Metode Hazard Analysis Risk Analysis of Occupational Safety and Health Using Hazard. Journal of Applied Business Administration ,Vol, 3(November), 95–103.
Sriagustini, I., & Supriyani, T. (2021). Assistance in identifying potential occupational safety and health hazards for woven bamboo craftsmen in Tasikmalaya. Kesehatan dan Keselamatan Kerja, 5(2), 251–255.
Dewi, T. (2019). Laboratorium Penelitian dan Pengembangan FARMAKA TROPIS Fakultas Farmasi Universitas Mualawarman, Samarinda, Kalimantan Timur. Laboratorium Penelitian Dan Pengembangan FARMAKA TROPIS Fakultas Farmasi Universitas Mualawarman, Samarinda, Kalimantan Timur, April, 5–24.
Wisudawati, T., & Saputro, W. A. (2021). Identification of implementation and understanding of health and work safety with hazard and operability study (Hazop) method at SMG Mulya Factory. Teknika: Jurnal Sains Dan Teknologi, 17(2), 250. https://doi.org/10.36055/tjst.v17i2.12393
Yafi, D. S. A. (2018). Assessment Risiko Kesehatan dan Keselamatan Kerja (K3) Menurut Variabel OHSAS dengan Menggunakan Metode HIRA, HAZID dan HAZOP. Fakultas Teknik Universitas Jember, 28–37.
