Pengendalian Kualitas Jersey dengan Menggunakan Metode Six Sigma dan Kaizen pada UMKM Titik Terang Konveksi
DOI:
https://doi.org/10.56799/jim.v2i6.1599Keywords:
Pengendalian Kualitas, Metode Six Sigma, Kaizen, UMKMAbstract
UMKM Titik Terang Konveksi is a company that produces jersey. There are 3 types of defects, namely untidy stitching, the screen printing color is not bright enough, and the fabric is folded during the press process, which increases production costs. The purpose of this study is to determine the factors that cause defects and their solutions to minimize losses using Six Sigma and Kaizen. From 759 products October 2022 there are 109 defects. DPMO values48265.41 and valuesigma 2,933 were caused by human, machine, method, material, and environmental factors. Proposed improvements, namely providing an understanding of product quality, reprimanding employees, providing job training,. Cleaning the machine before and after use, checking machine components and replacing them if necessary, supervising operators regarding machine operation according to SOP Making SOPs, implementing SOPs continuously and continuously. Check and store good raw materials. Adding blowers, increasing ventilation, rearranging rooms used for storage and production, placing goods/tools according to their functions and uses, disposing of unused items, making tool and item shelves, expanding the building. Then the addition of 5S posters so that the work environment is always well organized. Thus, the factors that cause defects will be reduced and minimize losses.
Downloads
References
Almansur, A.M., Sukardi, S. and Machfud, M. (2017) ‘Improving Performance of Biscuit Production Process Through Lean Six-Sigma At Pt Xyz’, Indonesian Journal of Business and Entrepreneurship, 3(32), pp. 77–89.
Basith, A., Indrayana, M. and Jono, J. (2020) ‘Analisis Kualitas Produk Velg Rubber Roll Dengan Metode Six Sigma Dan Kaizen’, Jurnal Rekayasa Industri (JRI), 2(1), pp. 23–33.
Dasig Jr, D. (2017). A frontier in organizational and business process innovation in service management through lean six sigma Kaizen project implementation. Journal of Administrative and Business Studies, 3(6), 263-283.
Gaspersz, V. (2002). Pedoman Implementasi Program Six Sigma Terintegrasi demgan ISO 9001:2000, MBNQA, dan HACCP. Jakarta: Gramedia Pustaka Utama.
Hairiyah, N. (2020) ‘Penerapan Six Sigma Dan Kaizen Untuk Memperbaiki Kualitas Roti Di Ud. Cj Bakery[Application of six sigma and kaizen to improve the bread quality In UD. CJ Bakery]’, Jurnal Teknologi & Industri Hasil Pertanian, 25(1), p. 35.
Indrawansyah, I. and Cahyana, B.J. (2019) ‘Analisa Kualitas Proses Produksi Cacat Uji Bocor Wafer dengan menggunakan Metode Six Sigma serta Kaizen sebagai Upaya’, Prosiding Seminar Nasional Sains dan Teknologi, pp. 1–8.
Kualitas, A.P. and Kaizen, D.A.N. (2019) ‘Sebagai Upaya Pengurangan Produk Cacat Dengan Pendekatan Six Sigma , Poka-Yoke’, 12, pp. 79–88.
Laili, Hidayatul Nur; SUPARTO, Suparto. Analisis Pengendalian Kualitas Untuk Mengurangi Cacat Pada Produk Sepatu Dengan Metode Six Sigma Dan Kaizen Di Pt. Karya Mitra Budi Sentosa. In: Prosiding Seminar Nasional Sains dan Teknologi Terapan. 2019. p. 217-224.
Mhone, A.O. and Jin, J. (2021) ‘Deployment of Lean Six Sigma and Kaizen Techniques: A Case Study of the Concrete Production Plant for the 750 MW (5 * 150 MW) Kafue Gorge Lower Hydro Power Project’, American Journal of Industrial and Business Management, 11(10), pp. 1052–1069.
Nabila, K. and Rochmoeljati, R. (2020) ‘Analisis Pengendalian Kualitas Menggunakan Metode Six Sigma Dan Perbaikan Dengan Kaizen’, Juminten, 1(1), pp. 116–127.
Parwati, C. I., Susetyo, J., & Alamsyah, A. (2019). Analisis Pengendalian Kualitas Sebagai Upaya Pengurangan Produk Cacat Dengan Pendekatan Six Sigma, Poka-Yoke Dan Kaizen. Jurnal Gaung Informatika, 12(2).
Pitoyo, D. and Akbar, A.R. (2019) ‘Analisis Pengendalian Kualitas Produk Dengan Metode Six Sigma Dan Metode 5 Step Plan Di Pt. Pikiran Rakyat Bandung’, Rekayasa Industri dan Mesin (ReTIMS), 1(1), pp. 1–13.
Prasetyo, A. et al. (2021) ‘Pengendalian Kualitas Pada Spandek Dengan Penerapan Six Sigma Dan Kaizen Untuk Meminimasi Produk Cacat (Studi Kasus: Pt. Abc)’, Pengendalian Kualitas Spandex Dengan Penerapan Six Sigma Dan Kaizen, pp. 29–34.
Rahmadi, I. and Bernik, M. (2018) ‘Penerapan Lean Six Sigma Pada Ukm Untuk Meningkatkan Kualitas Produk Pendukung Perangkat Telekomunikasi’, II(1), pp. 9–24.
Rumampuk, N.I. and Yuliawati, E. (2019) ‘Analisa Pengendalian Kualitas Produk Kastok Plastik Menggunakan Metode Six Sigma Dan Pendekatan Kaizen’, Prosiding Seminar Nasional Sains, pp. 143–150.
Salomon, L.L., Ahmad, A. and Limanjaya, N.D. (2017) ‘Strategi Peningkatan Mutu Part Bening Menggunakan Pendekatan Metode Six Sigma (Studi Kasus: Department Injection Di Pt. Kg)’, Jurnal Ilmiah Teknik Industri, 3(3), pp. 156–165.
Silalahi, E., Emaputra, A. and Parwati, C.I. (2022) ‘Analisis pengedalian kualitas produk sabun cuci piring menggunakan metode six sigma dan kaizen di cv master multi jaya’, (November), pp. 66–76.
Studies, B. (2017) ‘A frontier in organizational and business process innovation in service management through lean six sigma Kaizen project implementation’, Journal of Administrative and Business Studies, 3(6).
Suhartini, S. and Ramadhan, M. (2021) ‘Analisis Pengendalian Kualitas Untuk Mengurangi Cacat Pada Produk Sepatu Menggunakan Metode Six Sigma dan Kaizen’, Matrik, 22(1), p. 55.
Widjajanto, S. and Hardi Purba, H. (2021) ‘Six Sigma Implementation in Indonesia Industries and Businesses: a Systematic Literature Review’, Journal of Engineering and Management in Industrial System, 9(1), pp. 23–34
